Publicité
Les langues disponibles
Les langues disponibles
OPTIONAL FUNCTIONS
WORKING LED HEADLIGHTS
1
1
AT THE END OF THE WORK
At the end of the work, and before carrying out any type of maintenance, perform the following operations:
1.
Take the machine to the designated debris hopper emptying area.
WARNING: the place designated for this operation must comply with current regulations concerning safety at
work and current environmental protection regulations.
CAUTION: it is recommended to wear the appropriate PPE (Personal Protective Equipment), suitable for the
work to be carried out.
2.
Follow the steps to empty the debris hopper - refer to "EMPTYING THE DEBRIS HOPPER"
3.
Carry out all the daily machine maintenance procedures - refer to "MAINTENANCE PROGRAM".
4.
Once the daily maintenance operations are complete, take the machine to the designated storage location.
ATTENTION: park the machine in an enclosed place, on a flat surface; near the machine there must be no
objects that could either damage it, or be damaged through contact with it.
5.
Put the machine in the safety position - refer to "SECURING THE MACHINE".
ATTENTION: before setting aside the machine, read the "SETTING ASIDE THE MACHINE" section in the
"GENERAL SAFETY RULES" document provided with the machine.
Upon request, the machine can be equipped with the LED
headlight kit (1).
The kit increases visibility in the working direction and is
automatically activated when the machine is switched on.
35
Publicité
