Zipro Dunk Manuel D'utilisation page 14

EN
STEP 1.
Remove plastic covers (A) by unscrewing bolts (17) and washers (18)(16) from
the front and rear base.
Fix the rear (3) and front base (2) to the main frame (1) using flat washers (16),
Allen bolts (17) and spring washers (18).
STEP 2.
Separate the handlebar column cover (51A/B), unscrew the handlebar angle
adjustment knob (57) and run the heart rate sensor cable (62) through the
opening in the computer bracket in the upper part of the front column (4).
STEP 3.
Connect the computer cable from the upper part of the handlebar column
and the heart rate sensor cable (62) to the cables from the computer (47).
Install the computer (47) on the computer bracket in the upper part of
the front column (4) with bolts M4x10 (52).
Fix the front column cover (51A/B) with the slotted-head bolt (64)
and tighten the resistance knob with bolts ST4.2x18 (35) and bolts ST3x15 (53).
14