Skandika Fitness HELIOS SF-1900 Instructions De Montage Et Mode D'emploi page 32

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Error messages
"----
" "
----" means, that the contact to the handpulse sensors was not sufficiently for a measure-
ment. The reason for this can be that you have not grasped the two sensors correctly. Start a new mea-
surement with correctly placed hands!
"E-1" means, that no heart rate signal has been detected.
"E-4" appears, if the fat % or BMI values are too low (<5) or too high (> 50).
Notes:
1) This computer has an automatic on/off function so that it switches on when the pedals move or when
any button is pressed, and turns into stand-by mode automatically if no signal has been received for
approx. 4 minutes.
2) In case of any abnormal functions, disconnect the device from power source and reconnect after some
minutes
32
Fig. 21
Fig. 23
Fig. 25
Fig. 22
Fig. 24

Publicité

Table des Matières
loading

Table des Matières