Publicité
30
B
ji(2y Oley) (elie
English
Controlling CD Shuttle
(Optional)
—
If an optional Alpine 6-disc CD Shuttle is
connected to the 8-pin DIN connector of the
TDM-7529T/7529F/75261/7526F/7526W,
you can control the CD Shuttle using the
TDM-7529T/7529F/75261/7526F/7526W.
Notes:
1. The controls on the TDM-7529T/
7529F/75261/7526F/7526W for
the CD operation are operative
only when the CD Shuttle is
interconnected with the
_
TDM-7529T/7529F/75267T/7526F/
7526W.
—
. Before operating the CD Shuttle
for the first time after connecting,
the unit should be reset. Reduce
the volume and press and hold
the DISC >All button for at least
3 seconds.
The display example shows when playing
the Track 1 on the Disc 3.
Press the DISC > /Il button to activate the
connected CD Shuttle. The display shows
the disc number and track number.
Press the Preset buttons to select the
desired disc loaded in the CD Shuitie.
Press the DISC >All button to pause CD
play. The display shows "PAU."
To resume CD play, press again. The PAU
indicator disappears.
Note: Be sure to eject the cassette tape
when you want to operate the CD
Shuttle in the tape play mode.
Publicité
