Publicité
26
—_
or/ou/o
fee
English
Receiving Traffic
Information (SDK)
(TDM-7529T/7526T
only)
You can receive the traffic information in
Germany where it is broadcast in the FM band.
Press the TUNER BAND button until the F1
or F2 is displayed.
Press the SDK button to activate the SDK mode.
The SDK indicator appears on the display.
Note:
The SDK button is inoperative in the
Auto Memory mode.
Press the DN or UP button repeatedly to tune in a
desired traffic information station manually, or
press and hold to automatically tune in a traffic
station. When a traffic information station is tuned
in, the SK indicator lights up.
Note:
When the unit receives the SK signal, the
SK indicator lights up irrespective of the
SDK button position.
If the traffic information is being broadcast, you
can
receive
it immediately
atthe
preset volume
level. If it is not being broadcast, your unit goes
into the standby status and receives regular FM
broadcast (or you can play a tape). When the
station starts the traffic information service, the
unit automatically switches to the traffic informa-
tion (the tape player continues playing if you are
playing a tape). When the traffic information
service is over, the unit automatically switches
back to regular FM broadcast and the volume
returns to the original level.
Note:
if the traffic information signal falls below a
certain level during reception, the SK
indicator goes off and the unit will be
placed in standby status for 70 seconds. If
this status continues over 70 seconds, a
rhythmical beep sound will be produced.
Press the SDK buiton to turn off the beep
sound and deactivate the SDK mode or
tune in another traffic information station.
Publicité
