10
English
Initial System Start-Up
immediately after installation, after the
vehicle's battery has been disconnected, or
after the addition of an optional CD Shuitle, it
is necessary to reset the system. This is
done by first setting the volume level to its
minimum. Next, press and hold the DISC
button for at least 3 seconds.
Turning Power
On and Off
Press the PWR buiton to turn on the unit.
Note:
The unit can be turned on by pressing
any other button except the eject 4,
<< and &
butions.
The volume level gradually increases to the
previous level you were listening to before
the unit was turned off.
Press the PWR button again to turn off the
unit.