Maintenance; General Maintenance Procedures; How To Clean Interacoustics Products; Concerning Repair - Interacoustics EyeSeeCam Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 221

7 Maintenance

General maintenance procedures

The operator is responsible for the perfect state of the instrument.
Immediate maintenance is required if:
The instrument was subjected to extreme mechanical stress (impact, defective cable due to
inadmissible traction);
Fluid gets into the instrument;
Cables and/or connectors are defective;
Rubber-joints have developed cracks.
For further details please contact your Interacoustics representative.

How to clean Interacoustics Products

If the surface of the instrument or parts of it are contaminated, it can be cleaned using a soft cloth
moistened with a mild solution of water and dish washing cleaner or similar. The use of organic solvents
and aromatic oils must be avoided. Always disconnect the USB cable during the cleaning process, and be
careful that no fluid is entering the inside of the instrument or the accessories.
Before cleaning always switch off and disconnect from power
Use a soft cloth lightly dampened with cleaning solution to clean all exposed surfaces
Do not allow liquid to enter the camera housing
Do not autoclave, sterilize or immerse the instrument or accessory in any fluid
Do not use hard or pointed objects to clean any part of the instrument or accessory
Recommended cleaning and disinfection solutions:
Warm water with mild, nonabrasive cleaning solution (soap)
Procedure:
Clean the instrument by wiping outer case with a lint free cloth lightly dampened in cleaning
solution

Concerning repair

Interacoustics is only considered to be responsible for the validity of the CE marking, effects on safety,
reliability and performance of the equipment if:
1. Assembly operations, extensions, readjustments, modifications or repairs are carried out by
authorised persons,
2. A 1 year service interval is maintained
3. The electrical installation of the relevant room complies with the appropriate requirements, and
4. The equipment is used by authorised personnel in accordance with the documentation supplied
by Interacoustics.
EyeSeeCam vHIT - Instructions for Use - EN
Page
57

Publicité

Table des Matières
loading

Table des Matières