Interacoustics EyeSeeCam Instructions D'utilisation page 59

You need to complete at least one run of each protocol, Lateral, RALP and LARP. If you choose to run a
protocol more than one time, then you can use the check marks to decide which run from each protocol
you wish to display in your EyeSeeSix Report. You are only allowed to have one check mark per protocol
(RALP, LARP and Lateral) if you want to generate an EyeSeeSix Report.
What you see in the report are 5 main things:
1. Raw tracings
Raw tracings show the impulse data overlaying the eye head movements. The impulses are shown
in red if they stimulate a right sided canal (R-lateral, R-posterior and R- anterior) and blue if they
stimulate a left sided canal (L-lateral, L-posterior and L-anterior).
2. Regression plots
Allows for graphical data analysis over the entire velocity range of the head impulses
3. Gain calculations
Lateral gains are shown for both the 60 ms calculation and the average regression plot slope gain
calculation.
Vertical gains are shown as the average regression slope gain.
EyeSeeCam vHIT - Instructions for Use - EN Page 49