Servicing And Maintenance; Software Setup; Installing Eyeseecam Software; Uninstalling The Eyeseecam Vhit Software - Interacoustics EyeSeeCam Instructions D'utilisation

Servicing and maintenance

The vHIT system must be serviced at least once a year. The service must include a safety test.

Software setup

Installation of OtoAccess® – Please refer to the OtoAccess® manual and documentation.
Installation of EyeSeeCam vHIT software - Please refer to the EyeSeeCam installation CD and
instruction.

Installing EyeSeeCam software

Follow the prompts on the screen to step through the software installation.
Figure 3.5.1-1 Set up Wizard for EyeSeeCam

Uninstalling the EyeSeeCam vHIT software -

Please refer to the EyeSeeCam installation CD and instruction.
Starting EyeSeeCam from OtoAccess® 1.5
To start EyeSeeCam:
1. Double Click the OtoAccess® icon on the desktop which will open the OtoAccess® program
2. Select the instrument (in this example, EyeSeeCam) by double-clicking EyeSeeCam in the
Select Instrument box. EyeSeeCam will open in a new window.
EyeSeeCam vHIT - Instructions for Use - EN Page 10