Elica RATIO 804 PLUS BL Prescriptions De Montage Et Mode D'emploi page 14

3. OPERATION
CONTROL PANEL
T. Function
Hob ON/OFF
1
Selection of the cooking zones / Cooking zone dis-
2
play
3 Increase/Decrease cooking power level
Display cooking power level
4 Activate "STAND ALONE" timer
Display: "STAND ALONE" timer / Cooking Zones
Timer.
Increase/Decrease "STAND ALONE" Timer time /
5
Cooking Zones timer
6 Activation of Cooking Zones Timer
Indicator of Cooking Zones Timer active
7 Automatic Heat Up Activation.
Temperature Manager activation (Warming Func-
8
tion)
9 Pause
10 Key Lock
11 Power Limitation selection
THINGS TO KNOW BEFORE STARTING
All functions of this hob are designed to comply with the
most stringent safety regulations. For this reason:
• Some functions will not be activated, or will be
automatically deactivated, in the absence of pots on
the burners or when they are poorly positioned.
• In other cases the activated functions will be automatically
deactivated after a few seconds, if the specific function
requires a further setting that has not been selected (e.g.:
"Turning the hob on" without "Selecting the cooking zone"
and the "Operating temperature", or the "Lock Function" or
the "Timer" function).
Wait for the display to turn off before approaching the
cooking zone.
Please note! In the case (for example) of prolonged use,
the cooking zone may not immediately shut down because
it is in the cooling phase; the symbol
cooking zone display to indicate that this phase is under
way. Wait for the display to turn off before approaching the
cooking zone.
COOKING ZONE DISPLAY
The following is shown on the cooking zone displays:
Function
Cooking zone on
Power Level
Residual Heat Indicator
Pot Detector
Bridge Zone Function active
Temperature Manager Function active
Pause function
Automatic Heat UP function
14
will appear on the
Value