Publicité
Les langues disponibles
Les langues disponibles
teries, only certified, intrinsically safe batteries must be used. Set the battery
charger to the type of battery to be charged:
-
-
-
-
-
-
-
The device must be handled correctly in order for it to work. Never pull on the
cable when handling the device.
FCC regulations
This device conforms to the limit values for a Class B digital device, pursuant to
Part 15 of the FCC regulations. These limit values are designed to provide reas-
onable protection against harmful interference in a residential installation. This
device generates and uses high frequency energy and, if not used in accordance
with the instructions, may interfere with radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception,
which can be determined by turning the device off and on again, the user is en-
couraged to try to correct the interference using one or more of the following
measures:
-
-
-
-
Grid connection
Danger from electrical current.
This may result in serious injuries or death.
▶
▶
Pb-WET batteries (PzS, GiS, ...):
vented lead-acid batteries with liquid electrolyte
Pb-GEL batteries (PzV, GiV, ...):
valve-regulated, sealed lead-acid batteries (VRLA) with fixed electrolyte (gel
or nonwoven fabric)
NiCd batteries:
vented or sealed NiCd batteries with liquid electrolyte
Pb-CSM-WET batteries (Copper Stretched Metal):
vented lead-acid CSM batteries with liquid electrolyte
Lead Crystal batteries:
EVFJ/CNFJ-type Lead Crystal batteries
PzQ batteries:
for heavy-duty applications
Li-Ion batteries:
LFP, LTO, NMC, NCA, NCO, LMO, LCO
FCC
Reorient or relocate the receiving antenna.
Increase the distance between the device and the receiver.
Connect the device to a different circuit than the receiver.
Consult the distributor or an experienced radio/TV technician for help.
WARNING!
Before starting work, switch off all devices and components involved, and
disconnect them from the grid.
Secure all devices and components involved so they cannot be switched back
on.
17
Publicité
