Publicité
Les langues disponibles
Les langues disponibles
Display
Overview of dis-
No.
play modes
As long as a battery is connected to the battery charger, the charging process
can only be interrupted and resumed by pressing the "Pause/Start" button. It is
only possible to change the display modes with the "Menu" button after discon-
necting the battery from the battery charger. A detailed description of the dis-
play modes is given in the following chapter.
A limited menu selection is available while charging has been paused.
NOTE!
A limited menu selection is available while charging has been paused.
Resetting set-
The menu item offers 2 possibilities to reset all settings made:
tings
38
Function
Standard mode
In standard mode, the display shows the charging parameters.
Statistics mode
Visualizes the frequency of the operating states of the device and
shows the total number of charges, as well as an overview of the abso-
lute and average Ah delivered and energy consumed per charge.
History mode
Provides information regarding the parameters of all stored charging
processes.
Configuration mode
Configuration mode enables all settings to be made for the device and
the charging process.
USB mode
USB mode supports a device update, the backup and uploading of
device configurations, as well as logging of charging parameters during
the charging process via USB thumb drive.
Reset Factory Settings:
-
Reset the settings made to the
factory settings.
Reset Default Settings:
-
Resetting the settings made to the
manufacturer's default settings.
Publicité
