Publicité
Les langues disponibles
Les langues disponibles
3
4
5
To exit the current menu:
6
Exiting configur-
If one or more relevant settings for the charging process are changed in configur-
ation mode
ation mode, another prompt appears when exiting configuration mode, asking
whether the setting in question should be applied.
The following settings must be confirmed when exiting configuration mode:
-
-
-
-
-
If necessary, use the "Up/Down" buttons to make a selection, e.g., "Off/On" or
enter a value.
Press the "Pause/Start" button to confirm the entry.
If the cursor moves to the next setting or digit after confirming, proceed
again as described in points (3) and (4)
Press the "Menu" button to return to the higher-level selection.
Curve
Battery capacity in Ah (RI curve excluded)
Number of cells
Equalizing charge ON/OFF
CAN protocol
Example:
Change to the curve from 3 - IUI (Pb-
WET) to 6 - RI (Pb-WET).
If the setting is not confirmed, the bat-
tery charger returns to configuration
mode and the setting can be changed
to the desired value.
45
Publicité
