Publicité
Les langues disponibles
Les langues disponibles
As long as a battery is connected to the battery charger, the charging process
can be paused and resumed by pressing the "Pause/Start" button. It is only pos-
sible to change the display modes with the "Menu" button, as described in the
"Display" chapter, after disconnecting the battery from the battery charger.
Ending the char-
ging process
Danger due to oxyhydrogen ignition caused by sparks when disconnecting the
charging cables.
This can result in severe personal injury and damage to property.
▶
Danger if the plug connection is disconnected during the charging process
This can result in severe personal injury and damage to property.
▶
▶
Danger of battery damage when disconnecting the battery from the battery
charger if the charging process is not yet fully completed.
This can result in damage to the battery.
▶
Once the battery is fully charged and cooled down, the following indicators light
up:
End the charging process as follows:
1
36
WARNING!
Before disconnecting or unplugging the charging plug, end the charging pro-
cess by pressing the "Pause/Start" button.
WARNING!
Do not disconnect the plug connection while the charging process is running.
Do not touch live contacts on the charging plug.
CAUTION!
Do not disconnect the battery from the battery charger until it is fully
charged (green "Battery is charged" indicator lights up).
Press the "Pause/Start" button.
-
"Battery is charged" indicator
(green)
-
"Battery cold" indicator (blue)
For optimum battery life, do not dis-
connect the battery from the battery
charger until the blue "Battery cold"
indicator lights up in addition to the
green indicator, as explained below. If
several battery chargers are in use, re-
move the battery that has been fully
charged (coolest) for the longest time
first.
Publicité
