Publicité
Les langues disponibles
Les langues disponibles
1
Enter the configuration menu as follows:
1
1
2
3
4
Navigate through the configuration menu and its submenus as follows:
1
2
44
Use the "Up/Down" buttons to call up the following information:
-
Device serial number as well as serial number and version of the config-
uration memory.
-
PC board for control/power electronics: Hardware version and serial
number.
-
Software: Main software, secondary software, primary software, and
curve block version.
Press the "Pause/Start" button.
Use the "Up/Down" buttons to enter the first digit of the code.
Press the "Menu" button to move to the next digit of the code.
Continue as described above until the complete code is entered.
Confirm entry with the "Pause/Start" button.
Use the "Up/Down" buttons to select the desired menu item.
Press the "Pause/Start" button to confirm the menu item and confirm any
confirmation prompts (e.g., "OK?") again.
A prompt for the code appears.
Enter the required code "1511" as fol-
lows:
The selection of the main menu items
for configuration mode appears.
When selecting a menu item, you may
be prompted to read the Operating In-
structions. Confirm this prompt by
pressing the "Pause/Start" button
again.
Publicité
