CALYS 1500
A. GENERAL
We are very grateful to you for choosing this
experience of over one hundred years in the manufacture of high quality, accuracy measuring instruments.
Because of this, we are able to continue our policy of continuous innovation which has served our customers so well over
AOIP S.A.S
the last 100 years.
us to perfect our know-how and improve our future products.
D.1 Introduction
The CALYS 1500 is highly accurate multifunction calibrator used to measure and transmit simultaneously over 2 insulated
channels or to measure over 2 input channels (differential measurements or comparative measurements). It is specially
designed for calibration and maintenance and can measure and simulate physical and electrical quantities, either on site
or in the laboratory.
It can perform all the following functions:
Measure voltages, direct currents, resistance and pressure over 2 insulated channels.
Measure temperatures by thermocouples, resistive probes, thermistors over 2 insulated channels.
Supply power and measure a current loop which is compatible with the HART® protocol.
Measure frequencies and counts (over one channel)
Generate DC voltages and currents.
Simulate resistance, thermocouples, resistive probes and thermistors.
Recording of measurements and their display as a table or trend curve.
Calibration and generation of the calibration report.
Possibility of using calibrated sensors with memorization of the calibration factors
Measurement and transmission or measurements over 2 channels can be carried out simultaneously with double display.
The CALYS 1500 has many associated functions that extend its range of application:
Relative measurement.
Results displayed based on a linear or other conversion law.
Generation of increments and simple or cyclic ramps.
Synthesis of curves.
Compatibility with 21CFR Part 11 standard for electronic records
A number of improvements have provided it with:
Rapid access to all its functions.
Intuitive user interface.
Advanced on-line help system.
Multi-functions keys defined step-by-step on the display.
Connections which can be made with 4 mm safety plugs.
Protection against overloads.
Powered by a rechargeable battery with rapid internal charger.
98/184
NTA47271-300A2
AOIP S.A.S
encourages your comments and would willingly accept any suggestions from you to help
accuracy measuring instrument which benefits from our
GENERAL