Publicité
Les langues disponibles
Les langues disponibles
STOP:
Stops the current storage operation.
PARAMETERS
This can be used to define:
the burst size (10,000 values max.),
the sampling period, from 0.5 sec. to 30 min,
and the type of trigger (none, low level, high level).
the same parameters may be selected for both channels (V1 and V2),
the same commands common to both channels (V1 and V2) may be selected
Trigger on programmed value = 3 V
Burst display:
The burst can be displayed as a table of values or a trend curve.
At this level, markers can be set (F1 and F2 function keys) and all values falling between these 2 markers can be
displayed in graphical form.
Block size (2,500 measurements)
Post trigger = 1000 measurement
Storing the current acquisitions
NTA47271-300A2
C
167/184
Publicité
