AOIP CALYS 1500 Mode D'emploi page 104

CALYS 1500
Handle press
button
A.3 Software
The firmware of the CALYS 1500 is stored in flash memory. It is therefore easy to update the firmware when a new
version is available. Refer to paragraph A.5.1 for detailed information on updating the firmware.
A.3.1 User Interface
The basic items forming the user interface are shown in the diagram below:
The "on-line help" function is not visible in the menu, but is accessible at any time by pressing the
a help window for the function in use appears. The
displayed.
The main menu is located at the bottom of the screen, opposite the four function keys (F1 to F4). To select an item from
the menu, press the associated function key.
Navigation within menus and sub-menus is by means of the navigation keys and the ENTER key.
For example, to display the% FS menu in the example of the screen below, perform the following steps:
1) Press the F4 key associated with the proposed Mode from the main menu.
2) Press the Down
ENTER key.
104/184 NTA47271-300A2
Mobile case legs
navigation key twice to select the Predefined settings sub-menu and confirm with the
key closes the help window and all the dialogue boxes
GENERAL
key. When active,