AOIP CALYS 1500 Mode D'emploi page 149

C.1.2 Incremental Edit Mode
When this mode is active, the
Use the 4 navigator keys to edit the value to be transmitted.
To select a digit, use the Left
display (white on black).
To increment/decrement the digit selected, use the Up
The value displayed is immediately active and it is not necessary to confirm it.
C.1.3 Predefined Settings Mode
This mode is available for the DC current transmission function for the 0-20 mA and 4-20 mA ranges only.
Two types of predefined settings are offered: Valve Test and Percentage of full scale (% of FS).
In the case of valve test, the predefined values are displayed in the left hand side of the transmission window. The
icon is displayed in the right hand side of the window.
The Up/Down keys of the navigator can be used to select the setting from the list. The ENTER key transmits the selected
setting. The Left/Right keys of the navigator are used to transmit the previous/next setting. The numerical keys 0 - 9 are
used to enter the value to be transmitted on the keyboard.
icon appears in the transmission window.
and Right keys of the navigator. The editable digit appears reversed in the
Calibrated sensors
or Down key of the navigator.
NTA47271-300A2
C
149/184