AOIP CALYS 1500 Mode D'emploi page 133

Once the procedure defined, it may be "Run" with the F4 key, "Duplicated" with the F2 key or "Edited" with the F3 key. "B"
in the HART column indicates that it is a verify loop procedure.
When running, you may enter the device serial number, name of the operator and a comment. This information will be
shown in the verification report (PV).
Select "Adjustment step": "Before adjustment", "After adjustment" or "Not specified".
Measurement on channel V1
NTA47271-300A2
B
133/184