AOIP CALYS 1500 Mode D'emploi page 140

CALYS 1500
B.3 Generation / Simulation or Measurement on Channel V2
Channel V2 may be used as a Generation/Simulation or Measurement Channel. This channel is accessed with the F2
function key (V2). Pressing this button activates the transmission/simulation window: the lower window in the display is
then marked by a rectangular border.
Key F2 is used to switch
from channel V1
channel V2.
B.3.1 Generation / Simulation Mode
Generation/Simulation mode from channel V2 is accessed via the F1 function key (Menu). When in measurement mode:
Select V2 Configuration (near the bottom of the drop-down list) and Transmit with the function and navigation
keys.
Confirm with ENTER.
To select a simulation function, press the F1 key (Menu).
In Transmit mode, connections are across the four "IN/OUT" terminals located on the left bottom of the unit:
140/184 NTA47271-300A2
to
GENERAL