Program Your Pet Into The Pet Door - SURE petcare SURE FLAP pet door CONNECT Guide D'utilisation

Program your pet into the Pet Door

To program your pet's microchip ID into the Pet Door, you'll need to get them to put their head
inside the Pet Door tunnel so their chip can be read. If you're adding multiple pets, avoid mixing up
microchip IDs by adding each one separately (and making a note of the order you added them).
We strongly advise programming all of your pets into the Pet Door before fitting it.
1
2
3
4
5
We advise that you encourage your pet to put its head back into the tunnel once it's programmed in.
This is to double check that they can open the door reliably. Repeat this process to add more pets.
To perform the programming process with the RFID collar tag simply follow steps 1, 2 and 4
above and hold the collar tag inside the tunnel, making sure you touch the clear plastic door.
Make sure you are not wearing any metal jewellery when programming a collar tag as this can
cause interference.
If you want to use the Pet Door for more than one pet, you can add more pets easily by
repeating the process. You are able to store up to 32 pets in each Pet Door. If your Pet Door
is already installed but you are looking to add an additional pet then press the 'Add a pet'
button and wait for that pet to go through the door.
13
Remove the button cover to reveal the six buttons on the front
of the Pet Door. Press the 'Add a pet' button once to activate
the 'Add a pet' mode.
When the Door is in 'Add a pet' mode, the catches at the front
of the Pet Door will drop (you will hear a click) and the display
on the LCD screen will start flashing.
The Pet Door is now waiting for your pet. Place some dry food
or a treat inside the tunnel as close to the clear plastic door
as possible. The aim is to encourage your pet to put its head
inside the tunnel as if it were coming home.
When your pet enters the tunnel to eat the food, the sensors
inside the product activate and the Pet Door saves the chip ID.
Once the microchip has been successfully added, the screen
display will show the number that has been assigned to the pet,
e.g. 01 for the first pet you add and 02 for the second etc. When
your pet removes its head from the tunnel the catches on the
Door will move up again and the screen will go back to normal.