Becker R8/17PFR+ Notice D'utilisation page 23

Operating Instructions
7a)
Clack - Clack
7b)
Clack - Clack
8a)
Clack
8b)
2x
8c)
2x
Clack - Clack
Action
7) Deleting end limits
Note
The end limit settings can only be deleted via the master transmitter.
7a) Deleting the end limits individually
Adjust the shutter into the end limit posi-
tion to be deleted.
First press and hold the learn button. Within
3 seconds also press the STOP button and
keep both buttons pressed for 10 seconds.
7b) Deleting both end limits
Adjust the shutter curtain into any position
between the two end limits.
First press and hold the learn button. Within
3 seconds also press the STOP button and
keep both buttons pressed for 10 seconds.
8) Intermediate position
Note
The intermediate position can be set at any given position and lies between
the upper and lower end limits. The intermediate position can only be set
after the two end limits have been set.
8a) Setting the intermediate position
Adjust the shutter curtain into the desired
intermediate position.
First press and hold the STOP button. Within
3 seconds also hold the DOWN button and
keep both buttons pressed.
8b) Moving the shutter into the intermediate position
Note
The shutter moves into the intermediate position from the upper end limit.
Press the DOWN button twice within one
second.
8c) Deleting the intermediate position
Adjust the shutter into the intermediate po-
sition.
First press and hold the STOP button. Within
3 seconds also hold the DOWN button and
keep both buttons pressed.
23
Response
The tubular drive makes a "clack-clack"
sound to confirm.
The end limit has been deleted.
The tubular drive makes a "clack-clack"
sound to confirm.
Both end limits have been deleted.
The tubular drive makes a "clack" sound to
confirm.
The intermediate position has been stored.
The shutter curtain moves into the interme-
diate position.
The tubular drive makes a "clack-clack"
sound to confirm.
The intermediate position has been deleted.