Becker R8/17PFR+ Notice D'utilisation page 22

5d)
6a)
Clack
6b)
Clack - Clack
Clack
Action
to 5d) Anti-lifting device at the lower limit to upper stopper
Adjust the shutters until they are in the
lower limit position.
Then adjust the shutters up towards the
permanent upper stopper.
6) Changing the limit position settings
Note
The limit position settings can only be changed via the master transmitter.
6a) Decreasing the shutter travel distance (the desired limit position is within the
existing travel distance)
Adjust the shutters into the new desired
limit position.
First press and hold the learn button. Within
3 seconds also press the DOWN button for
the lower limit or the UP button for the up-
per limit and hold both buttons.
6b) Increasing the shutter travel distance (the desired limit position is outwith the
existing travel distance)
Adjust the shutters to the limit position
which you wish to extend.
First press and hold the learn button. Within
3 seconds also press the STOP button and
hold both buttons pressed for 10 seconds.
Now adjust the shutters into the new de-
sired limit position.
First press and hold the learn button. Within
3 seconds also press the DOWN button for
the lower limit or the UP button for the up-
per limit position and hold both buttons.
22
Operating Instructions
Response
The tubular drive switches off automati-
cally.
The tubular drive switches off automati-
cally.
The end limits have been set.
The tubular drive makes a "clack" sound to
confirm.
The new limit position has been stored.
The tubular drive makes a "clack-clack"
sound to confirm.
The end limit has been deleted.
The tubular drive makes a "clack" sound to
confirm.
The new end limit has been stored.