Samsung DVD-R150 Manuel De L'utilisateur page 42

DVD-Recorder Scheduled Record List
DVD-RW(VR) Current Time 12:27
No. Source Day Start End Speed V/P Edit
No. 01
01 PR 01 SAT 01 15:07 14:07 SP CH ►
02 PR 01 SUN 01 12:08 14:08 SP CH ►
03 Do you want to delete 'No.01' ? / / : : ►
Yes No
MOVE OK RETURN EXIT
DVD-Recorder Programme
DVD-RW(VR)
Title List
ShowView
Playlist
Scheduled Record List
ShowView Extended : Off
Disc Manager
Programme
Setup
MOVE OK RETURN EXIT
DVD-Recorder ShowView
DVD-RW(VR)
Title List
Enter ShowView Code number. [0-9]
Playlist
Disc Manager
Programme
Setup
0-9 NUMBER OK RETURN EXIT
DVD-Recorder Scheduled Record List
DVD-RW(VR) Current Time 12:00
No. Source Day Start End Speed V/P Edit
No. 01
Source Day Start End Speed V/P
PR 01 01 MON 12:01 14:01 SP Off
Available Time 00:42 XP
MOVE OK RETURN EXIT
DVD-Recorder Scheduled Record List
DVD-RW(VR) Current Time 12:00
No. Source Day Start End Speed V/P Edit
01 PR 01 01 MON 12:01 14:01 SP Off ►
02 : : ►
MOVE OK RETURN EXIT
Deleting the Scheduled Record List
Follow these directions to delete an entry from the timer record list.
1. With the DVD Recorder in Stop mode, press the TIMER button.
2. Press the OK or ► button.
3. Press the ▲▼ buttons to select the number of the timer recording you
want to delete, then press the OK or ► button.
• The Edit and Delete items are displayed.
4. Press the ▲▼ buttons to select Delete, then press the OK or ► button.
5. Press the ◄ ► buttons to select Yes, then press the OK button.
• The selected entry will be deleted from the list.
■
You can not delete programmes that are currently being recorded.
Using the ShowView Feature
►
►
Before presetting your DVD Recorder :
►
• Switch on both the television and your DVD Recorder.
• Check that the date and time are correct.
Up to twelve programmes can be preset.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Programme, then press the OK or ►
button.
3. Press the ▲▼ buttons to select ShowView, then press the OK or ► button.
• A message is displayed to allow you to enter the ShowView code.
4. Press the number buttons to enter the code of the programme that you
want to record in your television magazine.
• If you want to correct the ShowView code that you are entering:
- Press the ◄ button until the digit to be corrected is cleared.
- Enter the correct digit.
5. Press the OK button.
• The information concerning the programme is displayed.
• When using the ShowView function for the fi rst time with stored stations,
the programme number fl ashes. This one time, you must enter the PR
number manually by pressing the ▲▼ buttons.
6. If the programme and times are correct, press the OK button.
7. Turn the power off by pressing the STANDBY/ON button to activate the
timer recoding setting.
• Refer to pages 40~41 if you want to
- Check whether the timer Recording has set correctly or not.
- Cancel a preset recording.
■
The numbers next to each TV programme listing in the magazines
or newspapers are ShowView code numbers, which allow you to
programme your DVD Recorder instantly with the remote control.
Enter the ShowView code for the programme you wish to record.
■
ShowView is a trademark of Gemstar Development Corporation.
The ShowView system is manufactured under licence from Gemstar
Development Corporation.
English - 42
DVD-R155 only
DVD-R155 only