Samsung DVD-R150 Manuel De L'utilisateur page 24

Auto Channel Memory
17%
Stop
Manual Setup
PR CH Name Decoder System Edit
01 1 ---- --- ---- ►
Edit
02 --- ---- --- ---- ►
Delete
03 --- ---- --- ----
►
Swap
04 --- ---- --- ----
►
05 --- ---- --- -/- ►
06 --- ---- --- -/- ►
07 --- ---- --- -/- ►
MOVE OK RETURN EXIT
Manual Setup
Manual Setup
PR 01
CH ◄ 1 ►
Name - - - -
Decoder Off
MFT --- ---
System L/L'
Done
MOVE OK
Presetting Channels with the Auto Setup
function
This feature allows you to manually set the DVD Recorder tuner band to
Antenna or Cable, whichever you connected to the Antenna In jack during
initial setup.
1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU
button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3. Press the ▲▼ buttons to select Install, then press the OK or ► button.
4. Press the ▲▼ buttons to select Auto Setup, then press the OK or ► button.
The Country Seletion screen is displayed.
5. Press the ▲▼◄ ► buttons to select your "Country", then press the OK button.
• The DVD Recorder searches for the stations according to a preset
preference list corresponding to the country that you have selected.
Refer to following table when selecting your country.
A(Austria) NL(Netherlands)
B(Belgium) I(Italy)
DK(Denmark) N(Norway)
FIN(Finland) P(Portugal)
D(Deutschland) E(Spain)
6. Press the OK button to continue.
Channel scan will be started.
■
Press the OK button to stop the Auto Setup.
Presetting Channels with the Manual Setup
function
You can add preset channel that Auto Channel Search missed. And you
can delete a channel you wish to remove. You can programme the order of
channels.
1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3. Press the ▲▼ buttons to select Install, then press the OK or ► button.
4. Press the ▲▼ buttons to select Manual Setup, then press the OK or ►
button.
5. Press the ▲▼ buttons to select a PR(programme) you wish to edit, delete,
or swap, then press the OK or ► button.
Select Edit, Delete or Swap using the ▲▼ buttons, then press the OK or ► button.
• Edit : You can add or edit PR(programme). After change PR
informations(CH, Name, Decoder, MFT, System), select Done, then press
the OK button.
- CH : Tune the channel using ◄ ► buttons.
- Name : Display station name automatically detected in broadcasting signal.
If not detected, you can edit name by using ▲▼◄ ► buttons.
- Decoder : If you set on, you can record scrambled channels using external
decoder box.
Before setting on, refer to connecting external decoder box in the page 16.
- MFT : You can tune up the channel frequency better using ◄ ► buttons.
- System : You can select broadcasting system of the receivable channel
(B/G or L/L')
• Delete : the channel information of selected PR(programme) will be removed.
• Swap : You can swap the channel information of two PR(programme). For
example, if you wish to swap PR2 and PR5, select swap at PR2, then press
the OK button at PR5.
English - 24
S(Sweden) PL(Poland)
CH(Swiss) CZ (Czech)
TR(Turkey) Others
GR(Greece)
HU(Hungary)