Samsung DVD-R150 Manuel De L'utilisateur page 29

DVD-Recorder Audio
No Disc
Programme
Digital Output : PCM
DTS : Off
Setup
Off
Dynamic Compression : On
On
NICAM : On
MOVE OK RETURN EXIT
DVD-Recorder Audio
No Disc
Programme
Digital Output : PCM
DTS : Off
Setup
Dynamic Compression : On
Off
NICAM : On
On
MOVE OK RETURN EXIT
DVD-Recorder Video
No Disc
Programme
TV Aspect : 16:9 Wide
Setup
3D Noise Reduction : Off
Video Output : Component
HDMI/DVI Resolution : 576P
DivX(R) Registration
MOVE OK RETURN EXIT
DVD-Recorder Video
No Disc
Programme
TV Aspect : 16:9 Wide
4:3 LetterBox
3D Noise Reduction : Off
Setup
4:3 Pan-Scan
Video Output : Component
16:9 Wide
HDMI/DVI Resolution : 576P
DivX(R) Registration
MOVE OK RETURN EXIT
DVD-Recorder Video
No Disc
Programme
TV Aspect : 16:9 Wide
3D Noise Reduction : Off
Setup Off
On
Video Output : Component
HDMI/DVI Resolution : 576P
DivX(R) Registration
MOVE OK RETURN EXIT
▌ Dynamic Compression
This is only active when a Dolby Digital signal is detected.
• Off : You can enjoy the movie with the standard Dynamic Range.
► • On : When Movie soundtracks are played at low volume or from smaller
►
speakers, the system can apply appropriate compression to make low-
►
level content more intelligible and prevent dramatic passages from
►
getting too loud.
▌ NICAM
NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono
and Bilingual (transmission in another language). NICAM programmes are
always accompanied by a standard mono sound broadcast and you can
►
select the desired sound by setting NICAM on or off .
►
►
• Off : Only set at this position to record the standard mono sound during
►
a NICAM broadcast if the stereo sound is distorted due to inferior
reception conditions.
• On : NICAM mode
Setting up Video Options
You can enjoy high quality image through RGB or Component video
connections.
►
1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU
►
button.
►
2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
►
►
3. Press the ▲▼ buttons to select Video, then press the OK or ► button.
Video setup menu will be displayed.
4. Press the ▲▼ buttons to select desired video option, then press the OK or
► button.
5. Press the ▲▼ buttons to select the desired item, then press the OK or ►
button.
▌ TV Aspect
Depending on the type of television you have, you may want to adjust the
screen setting. (aspect ratio)
►
• 4:3 LetterBox : Select when you want to see the total 16:9 ratio screen DVD
►
supplies, even though you have a TV with a 4:3 ratio screen.
►
Black bars will appear at the top and bottom of the screen.
►
►
• 4:3 Pan-Scan : Select this for conventional size TV when you want to see
the central portion of the 16:9 screen. (Extreme left and right side of movie
picture will be cut off .)
• 16:9 Wide : You can view the full 16:9 picture on your widescreen TV.
3D Noise Reduction (motion adaptive noise reduction)
▌
• On : Provides a cleaner picture through noise reduction (for recording).
• Off : Normal
►
►
►
►
►
English - 29