EUROM Force 3000 IND Mode D'emploi page 47

CAUTION
Remove the filter with the help of pliers.
1. Make sure the device is off.
2. Remove the water supply.
3. Unscrew the garden hose coupling
(Figure 42, pos. 2).
4. Pull out the filter
5. Clean the filter under running water.
6. Put back the filter.
7. Put back the water garden hose coupling.
Clean the nozzle(s)
1. Make sure the device is off.
2. Remove the water supply.
3. Unscrew the nozzle of the jet gun.
4. Clean the nozzle with the cleaning pin
(Figure 43, pos. 1).
5. Flush it thoroughly (against the direction of
the high-pressure jet).
(Figure 42, pos. 1).
Figure 42.
Figure 43.
47