EUROM Force 3000 IND Mode D'emploi page 43

CAUTION
When using a cleaning agent, observe the safety data sheets of the
manufacturer of the cleaning agent, especially the instructions relating to
personal protective equipment.
CAUTION
Only use a cleaning agent specially suitable for high-pressure cleaners.
1. Remove the cap
cleaning agent tank
the back of the device.
2. Fill the tank with the cleaning agent.
3. Replace the cap (Figure
4. Spray a bit of cleaning agent on the dry
surface; let it react, but not dry.
5. Use the cleaning agent regulator
(Figure 39) on the front of the device to
control the amount of additional cleaning
agent.
(Figure 38, pos. 1) of the
(Figure 38, pos. 2) at
38, pos. 1).
Figure 38.
Figure 39.
43