Publicité
Les langues disponibles
Les langues disponibles
Prepare for winter / frost-free storage
• Clean the device.
• Make sure there is no left-over water in the device.
• If possible, store the device and accessories in a frost-free of frost-protected room. If not;
suck in anti-freeze before you store it. Use the anti-freeze instead of water.
After winter / frost-free storage
WARNING
If the device freezes, have it inspected by an Eurom authorized professional
before use.
CAUTION
Frost damage is not covered by warranty.
1. If applicable; clean the device.
2. Let the device thaw.
3. If applicable; remove anti-freeze.
Maintenance
WARNING
Do not repair or modify to this device.
WARNING
Always remove the plug from the socket before you start maintenance!
Repairs and inspections must be carried out by a EUROM authorized professional. If the device,
electric cable and/or electric plug are damaged, they should be replaced by the manufacturer or
its service employee or persons with similar qualifications to prevent risks.
Perform the following maintenance tasks after every use:
• Carefully remove dust, sand or other dirt from the connections (nozzle, extension lance, jet
gun, high-pressure hose and water inlet).
• Remove the nozzle from the extension lance. Regularly clean the nozzle with the supplied
pin. Flush it thoroughly (against the direction of the high-pressure jet).
Perform the following maintenance tasks regularly:
• Regularly Vaseline the O-rings of the connectors to prevent them from drying out.
• Clean the water inlet filter.
45
Publicité
