EUROM Force 3000 IND Mode D'emploi page 38

Main body
CAUTION
The water hose and female water coupling are not included.
1. Make sure the device is correctly assem­
bled.
2. Make sure the ON(I)/OFF(0) switch
(Figure 30, pos. 3) is in the OFF(0) position.
3. Screw the water inlet (including filter) on­
to the thread on the front of the machine
(Figure 30, pos. 2).
4. Place the power plug
to a earthed socket that is easily accessi­
ble.
5. Connect the water supply to the device
(Figure 30, pos. 2).
6. You will hear a 'click' when the water sup­
ply is correctly connected.
Jet gun
1. Make sure that the safety lock under the
trigger is locked
2. Screw the high-pressure hose
(Figure 31, pos. 2) onto the jet gun
(Figure 31, pos. 1).
38
(Figure 30, pos. 1) in­
(Figure 35).
Figure 30.
Figure 31.