EUROM Force 3000 IND Mode D'emploi page 41

Lock and unlock the trigger
1. If applicable, release the trigger
(Figure 35, pos. 2).
2. Turn the trigger
Start
1. Make sure the ON(I)/OFF(0) switch is in the OFF(0) position.
2. Open the external water supply completely.
3. Unlock the safety lock under the trigger.
4. Squeeze the trigger for several seconds to remove the air from the hose.
5. Switch the device on.
Cleaning
WARNING
Be aware of the kickback when squeezing the trigger.
CAUTION
When you stop temporary:
• turn the device off;
• close the external water connection;
• remove the power plug.
1. Hold the jet gun with both hands.
2. Aim the jet gun at the object that needs to be cleaned.
3. Squeeze the trigger and start cleaning.
Cleaning with floor cleaner
1. Hold the jet gun with both hands.
2. Place the floor cleaner on the surface the be cleaned.
3. Squeeze the trigger and start cleaning.
(Figure 35, pos. 1) lock.
Figure 35.
41