Télécharger Imprimer la page

Viking MI 422 PC Manuel D'utilisation page 125

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The text "Attention – iMow starting" and a
warning symbol are displayed before the
mowing operation.
Flashing of the display illumination
and a signal tone additionally
indicate the impending start of the
mowing motor. The mowing blade
is only activated a few seconds
after the robotic mower has been
set into motion.
Edge mowing:
While the robotic mower mows the
edges of the mowing area, the text
"Mowing edge" is displayed.
Drive to docking station:
When the robotic mower returns to
the docking station, the relevant
reason is indicated in the display (e.g.
Battery discharged, Mowing completed).
Battery charging:
The text "Charging battery" appears
during charging of the battery.
Message screen – all models:
Errors, faults or recommendations are
displayed together with warning symbol,
date, time and message code. If several
messages are active, they appear
alternately. (
24.)
The message and status
information appear alternately if the
robotic mower is ready for
operation.
0478 131 9935 C - EN
11.3 Information area
The following information is shown in the
top right corner of the display:
1. Charge state of the battery or charging
in progress
2. Automatic mowing status
3. Time
4. Mobile radio signal (MI 422 PC)
1. Charge state:
The battery symbol serves to
indicate the charge state.
No bars – battery discharged
1 to 5 bars – battery partially
discharged
6 bars – battery fully charged
During charging, the mains plug
symbol is shown instead of the
battery symbol.
2. Automatic mowing status:
When automatic mowing is switched
on, the Automatic symbol appears.
3. Time:
The current time is indicated in 24 hour
format.
4. Mobile radio signal:
The signal strength of the
mobile radio connection
(GPRS) is indicated using 4
bars. The more bars visible,
the better the reception.
A reception symbol with a
small x indicates that there is
no connection with the
Internet.
A question mark is shown
during initialisation of the radio module
(checking hardware and software – e.g.
after switching on the robotic mower).
11.4 Main menu
The main menu is displayed,
– when the status screen (
is left by pressing the OK button,
– when the "Main menu" command is
activated,
– when the Back button is pressed in the
second menu level.
11.2)
123

Publicité

loading

Ce manuel est également adapté pour:

Mi 422 pMi 422