Publicité
Les langues disponibles
Les langues disponibles
In conjunction with an external
docking station, guide loops must
be installed for offset drive home.
(
12.11)
Space requirement for external docking
station:
The docking station (1) must be installed
as illustrated with a corridor (2) for docking
and undocking to take place correctly. The
areas around the docking station and
outside of the perimeter wire must be flat
and freely travellable. Remove any bumps
or depressions.
Minimum clearance: A = 50 cm
Width of the free area: B = 40 cm
Maximum clearance to the mowing area:
C = 12 m
0478 131 9935 C - EN
Installing the docking station on a wall:
If the docking station is installed on a wall,
a recess (1) must be made on the left or
right of the floor plate using a pliers to
make space for the power cable (2).
9.2 Docking station connections
Removing the cover:
Pull the cover (1) apart slightly on the left
and right as illustrated and remove
upwards.
105
Publicité
