Télécharger Imprimer la page

Viking MI 422 PC Manuel D'utilisation page 117

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1 Fold open the left clamping lever (1).
2 Insert the stripped wire end (2) into the
terminal block as far as it will go.
3 Close the clamping lever (1).
Strip the right wire end (1) to the specified
length X using a suitable tool and twist the
wire strands.
X = 10-12 mm
0478 131 9935 C - EN
1 Fold open the right clamping lever (1).
2 Insert the stripped wire end (2) into the
terminal block as far as it will go.
3 Close the clamping lever (1).
Check the seating of the wire ends in the
terminal block: the two wire ends must be
firmly fastened.
● Close the panel. (
9.2)
Close the cover of the cable duct (1).
● After completing this installation
work, press the OK button.
Install the cover. (
9.2)
115

Publicité

loading

Ce manuel est également adapté pour:

Mi 422 pMi 422