Reinserting The Brew Group - Gaggia Milano MAGENTA PRESTIGE RI8702 Mode D'emploi

English
28
4219-465-03661 MAN. GAG.MAGENTA PRESTIGE 120V EN-FR Rev 01.indd 28
5 Remove the coffee residues drawer.
Cleaning the brew group under running water
1 Clean the coffee outlet duct thoroughly with a teaspoon handle or with another
round-tipped kitchen utensil.
2 Rinse the brew group and the coffee residues drawer thoroughly with
lukewarm water. Carefully wash the upper filter.
3 Let the brew group dry in the air.
Note: to avoid the build-up of fibres inside, do not dry the brew group with cloth.

Reinserting the brew group

1 Before reinserting the brew group back into the machine, make sure that the
two yellow reference marks on the side match. If this is not the case, perform
the following steps:
Make sure that the lever is in contact with the base of the brew group.
21/01/2021 12:19:04