Dispensing Hot Water - Gaggia Milano MAGENTA PRESTIGE RI8702 Mode D'emploi

English
22
QUICK MILK CLEAN
to start press
LATTE MACCHIATO AMERICANO
ACQUA CALDA
4219-465-03661 MAN. GAG.MAGENTA PRESTIGE 120V EN-FR Rev 01.indd 22
4 The machine dispenses a default amount of coffee and frothed milk into the
cup or the glass. Depending on the beverage chosen, either coffee or frothed
milk will be dispensed first.
If you wish to customise the settings of a specific beverage, please refer to the
"Beverage Customisation" section
5 After each preparation of frothed milk based and coffee beverages, it is best to
carry out the quick cleaning procedure of the milk circuit within 10 seconds.
However, the procedure can also be carried out later by accessing the cleaning
menu via the CLEAN/SET
the " QUICK CLEAN " option. Then press the "
Then, follow the instructions shown on the display.
Note: we recommend your cleaning of the machine via the quick clean procedure
at least once a day.
Press the START/STOP
procedure later.

Dispensing hot water

Warning: when preparation starts, the hot water dispensing spout may spray
steam and hot water. Before removing the hot water dispensing spout, wait until
the preparation has ended.
1 Insert the hot water dispensing spout.
2 Press the HOME button, browse the various screens using the green "
button, and select hot water.
HOME
3 Press the "HOT WATER" button. Finally, press the START/STOP
start dispensing.
Note: you can interrupt the brewing at any time by pressing the START/STOP
button.
If you wish to customise the settings of a specific beverage, please refer to the
"Beverage Customisation" section.
button. Press the " CLEAN " button and select
" button.
clean/setting
button to confirm, or "
START/STOP
" to carry out the
"
button to
START/STOP
START/STOP
21/01/2021 12:18:53