Reinserting The Brew Group - Gaggia Milano ANIMA PRESTIGE Mode D'emploi

Reinserting the Brew Group

7 Switch the main power button to "1". Press the Stand-by button.
8 Wait for the machine to perform an automatic rinse cycle.
9 Perform the "Brew Group Cleaning under Running Water" operation.
10 Remove the drip tray and the coff ee grounds drawer. Empty them and
insert them in the machine again.
11 Press the AROMA STRENGTH button and select pre-ground coff ee.
12 Press the ESPRESSO LUNGO button. The machine dispenses water from
the coff ee dispensing spout.
13 Repeat steps 11 and 12 twice. Throw away dispensed water.
1 Before reinserting the brew group into the machine, ensure the two
yellow reference indicators on the side coincide. If this is not the case,
perform the following step:
Ensure that the lever is in contact with the brew group base.
2 Ensure that the yellow locking hook of the brew group is in the right
position.
To correctly position the hook, push it upwards to the highest position.
If the hook is still in a lower position, this means that it has not been correctly
positioned.
3 Slide the brew group along the side guides into the machine until it locks
in the right position with a click.
Warning: do not press the PUSH lever.
4 Close the maintenance door.
English
23