Measuring Water Hardness; Intenza+ Water Filter - Gaggia Milano MAGENTA PRESTIGE RI8702 Mode D'emploi

1 sec.
4219-465-03661 MAN. GAG.MAGENTA PRESTIGE 120V EN-FR Rev 01.indd 15

Measuring water hardness

You will need to set the water hardness when you install your machine for the first
time.
Take the water hardness measuring strip contained in the packaging and follow
the steps shown on the display during the installation phase. To change the water
hardness later, press the CLEAN/SET
once in the settings menu, please select " WATER HARDNESS ".
1 Immerse the water hardness measuring strip in a glass of water for 1 second.
Remove the strip from the water and wait for 1 minute.
2 Check how many squares turn red.
3 Use the green " " and "
to the table below. Confirm the setting by pressing "
Small red
squares

INTENZA+ water filter

We recommend the use of INTENZA+ water filter to limit limescale formation. This
ensures a longer operating life of your machine and a better coffee aroma over
time.
Water is an essential element in brewing coffee. Therefore, it is extremely
important that water is always filtered adequately.
The INTENZA+ water filter prevents the formation of mineral deposits and
improves the quality of the water.
button, then select " SETTINGS ", and
clean/setting
" buttons to select the water hardness according
Value to set Water hardness
1 very soft water
2 soft water
3 hard water
4 very hard water
English
15
".
INTENZA+
A
A
B
C
21/01/2021 12:18:29