First Installation; Manual Rinse Cycle - Gaggia Milano MAGENTA PRESTIGE RI8702 Mode D'emploi

English
14
15 cm
15 cm
15 cm
15 cm
15 cm
LUNGO
LUNGO
4219-465-03661 MAN. GAG.MAGENTA PRESTIGE 120V EN-FR Rev 01.indd 14

First installation

Before using the machine, it is essential you follow a few simple steps which are
clearly described in the explanatory drawings you found in the quick guide at the
beginning of this instruction manual.
Note: for even tastier coffee, we recommend that you initially prepare at least 5
cups of coffee to allow the machine to self-adjust.

Manual rinse cycle

During the first installation or after a long period of machine inactivity, a manual
rinse cycle must be carried out.
1 Place a container under the coffee dispensing spout, scroll through the
different pages and select a " ESPRESSO LUNGO ".
2 Press the " " button until "
coffee.
3 Press the START/STOP
dispense hot water.
4 Empty the container and make sure that the hot water dispensing spout is
installed.
5 Place the container under the hot water dispensing spout and select " HOT
WATER ".
6 Press the START/STOP
7 Empty the container and repeat steps 5 to 7 until the water tank is empty.
8 When finished, refill the water tank to the MAX level. The machine is now ready
for use.
" is selected, without adding pre-ground
button to start dispensing. The machine will
START/STOP
button to start dispensing.
START/STOP
21/01/2021 12:18:26