Lubricating The Brew Group - Gaggia Milano MAGENTA PRESTIGE RI8702 Mode D'emploi

English
30
4219-465-03661 MAN. GAG.MAGENTA PRESTIGE 120V EN-FR Rev 01.indd 30

Lubricating the brew group

To ensure high quality performances of the machine, a lubrication of the brew
group is always necessary. Refer to the following table for the frequency of
lubrication.
Frequency of use
Low
Regular
High
1 Turn off the appliance and disconnect the power cord.
2 Remove the brew group and rinse it using lukewarm water (see the "Cleaning
the brew group under running water" section).
3 Apply a thin layer of the lubricant supplied around the insertion pin on the lower
part of the brew group.
4 Apply a thin layer of lubricant to the guides, on both sides (see figure).
5 Reinsert the brew group (see the "Reinserting the brew group" section).
Note: you can use the lubricant tube many times.
Number of beverages prepared
daily
1-5
6-10
>10
Lubrication
frequency
Every 4 months
Every 2 months
Every month
21/01/2021 12:19:09