Reinserting The Brew Group - Gaggia Milano CADORNA STYLE RI9600 Mode D'emploi

English
28
4219-450-07541 MANUAL GAG. CAD. PLUS EN-FR 120US rev_2.indd 28

Reinserting the brew group

1 Before reinserting the brew group into the machine, ensure that the two yellow
reference indicators on the side coincide. If this is not the case, perform the
following step:
Make sure that the lever is in contact with the base of the brew group.
2 Make sure that the yellow locking hook of the brew group is in the right
position.
To correctly position the hook, push it upwards to the highest possible position.
If the hook is still in the lower position, this means it has not been correctly
positioned.
3 Reinsert the brew group in the machine along the side guides until it locks in
the right position with a click.
Warning: do not press the PUSH lever.
4 Close the service door.
23/04/2020 09:31:31