1
Introduction
This document provides configuration and registration steps to connect the BD Veritor™
Plus Analyzer to BD Synapsys™ Informatics Solution using the BD Veritor™ InfoWiFi Module and a
local wireless network.
Configuring this instrument and navigating the software configuration process requires minimal IT
hardware connection knowledge.
2
Required Information and Materials
Ensure the following information and materials are available prior to performing this procedure. It
may be necessary to contact your IT department for login credentials.
2.1
BD Synapsys™ Informatics Solution information
•
Determine how your institution is connecting the BD Veritor™ Plus Analyzer to your
BD Synapsys™ Informatics Solution.
•
If the connection is using a wireless access point on the same network as your
BD Synapsys™ Informatics Solution install, this will be considered an "On Premise"
install, and the Fully Qualified Domain Name (FQDN) will be required.
To locate the FQDN:
1
Log into BD Synapsys™ Informatics Solution.
2
Copy the text in the URL address bar, up to and including .com, but not including
the https:// prefix as shown highlighted below:
https://your.domain-example.com/
•
If the BD Veritor™ Plus Analyzer is connecting to BD Synapsys™ Informatics Solution
over the internet, this will be considered a "Cloud" install, and you will only need to enter
your region (e.g., US, Europe, Japan).
•
BD Synapsys™ Informatics administrative username and password
5