General Information; How To Read The Manual; General Power Tool Safety Warnings - Stiga MPST 84 Li 48 V1 Manuel D'utilisation

1. GENERAL INFORMATION

1.1 HOW TO READ THE MANUAL

Some paragraphs in the manual contain
important information regarding safety and
operation and are emphasized in this manner:
DANGER
Failing to comply with the cautionary
note creates a situation of imminent risk
which, if not avoided, may result in instant
death or severe or permanent harm.
CAUTION
Failure to comply with the warning signal
will result in a situation of imminent
risk which, if not avoided, will cause
death or severe harm to health.
WARNING
Failure to comply with the warning signal
will result in a situation of imminent
risk which, if not avoided, may cause
minor machine-related damage.
NOTICE
It provides an instruction referring to a
necessary approach to deal with practices
that are not related to physical injury.
SAFETY INSTRUCTIONS
It provides an instruction referring to
specific procedures to be followed in
the event of situations endangering
human health or machine safety.
NOTE
Provides additional information to
previous safety message instructions.
The paragraphs inside a grey dotted frame
refer to optional features not available on all
the models referred to in this booklet. Check
if the feature is available on your model.
Whenever reference is made to a position on the
machine "front", "back", "left" or "right" hand side,
this refers to the operator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for
use are numbered 1, 2, 3, etc.
The components indicated in the figures are
identified with letters A, B, C, and so on.
Reference to component C in figure
2 is indicated with the wording: "See
fig. 2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only.
The actual pieces can differ from
those illustrated in this document.
1.2.2 Titles
The manual is divided into chapters and
paragraphs. The title of paragraph "2.1 Training"
is a subtitle of "2. Safety regulations". References
to titles or paragraphs are marked with the
abbreviation chap. or par. and the relevant
number. Example: "chap. 2" or "par. 2.1"
2. GENERAL SAFETY WARNINGS
2.1 GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instructions,
illustrations and specifications. provided
with this power tool. Failure lo follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
The term "power tool" in the warnings refers
to your mains-opera/eel (cordecl) power tool
or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders
well away while using power tools.
Distractions can cause you to lose control.
EN - 2