Publicité
EN
Door seal cleaning
1. Door seal strip remove
Holding the door seal by hand, pull-out according to the direction of arrow, and
then remove the whole door seal.
2. Door seal cleaning
Dipping with brush in water or edible grade alcohol clear the groove of door seal,
and then using cloth dip in clear water or edible grade alcohol to wipe on the sur-
face of door seal. Finally, clean the door seal with clean water and wipe it up with
clean cloth.
3. Installation after cleaning
Make sure that there is no residual droplet on the door seal be fore installing,
insert the door seal into the groove of the door ining, and press the door seal
ltightly from top to bottom by hand until the whole door seal is inserted into the
groove.
7- Care and Cleaning
. .
17
Publicité
