Publicité
9 - Installation
9.9 Door Reversibility
Before connecting the appliance to the power supply you should check, whether the door
swing must changed from right (as delivered) to left, if this is required by the installation
location and the usability.
WARNING!
The appliance is heavy. You need two persons to carry out the door reversibility.
Do not tilt the appliance more than 45 ° to prevent damage of the cooling system.
1
3
5
7
9
10
11
12
24
Assembly steps
2
9.6
1. Provide necessary tool.
2. Unplug the appliance.
4
3. Remove hinge hole cover and hinge cover(available for
4. Remove 2 screws in the back and the top cover(avail-
5. Removes 3 screws and hinge (available for CUQS
6
6. Removes 6 screws and 2 hinge (available for CUQS
7. Open and remove the door.
8
8. Remove cover in left side of door.
9. Fix the cover in right side of door.
10.Turn the door upside down, remove 2 screws and
11.Fix door stopper dismounted last step to the other
12.Tilt slightly backwards the cabinet, remove 3 screws,
(Fig. 9.6):
CUQS 513EWH/CUQS 513EW).
able forCUQS 58EWH/CUQS 58EW).
513EWH/CUQS 513EW).
58EWH/CUQS 58EW).
door stopper at the bottom of the door.
side and 2 screws.
the lower hinge and adjustable feet.
EN
EN
Publicité
