Fluke 3563 Guide D'introduction page 48

Gateway status LEDs
The gateway has 5 status LEDs.
LED Status
pictogramm
Power status LED (green); Lights steady when power connection is OK; Blinks
green constantly when power connection is not OK
Data connection LED (green); Lights steady green when Ethernet or WiFi
connection is OK; Blinks green constantly when Ethernet or WiFi connection is
not OK
Sensor connection LED (green); Lights steady green when connection between
sensors and gateway is OK; Blinks green constantly when connection between
any sensor and gateway is not OK
Connection to Accelix™ LED (green); Lights steady green when connection to
Accelix™ is OK; Blinks green constantly when connection to Accelix™ is not OK
Internal gateway temperature LED (green); LED is off when temperature
is <85°C (185°F) – OK; Blinks green constantly when temperature is
>85°C(185°F) – not OK
Technical specifications
Dimensions
Weight
Housing
Environmental
protection
Temperature
range
Power supply
Radio frequency 2.4 GHz ISM band according to IEEE 802.15.4
Ethernet
Status LEDs
Sensors
supported
160 x 160 x 90 mm (6 19/64 x 6 19/64 x 3 35/64 in) (LxWxD)
948 g (2.1 lb)
Polycarbonate
IP67
Relative humidity: 10% to 90% (non-condensing)
Operating: -20 °C to 60 °C ( -4 °F to 140 °F)
Storage: -40 °C to 80 °C ( -40 °F to 176 °F)
24 V DC or Power over Ethernet (PoE) — PoE 802.3af
RJ45 connector with PoE
5 status LEDs
20 (dependent on environmental conditions)
45