Fluke 3563 Guide D'introduction page 24

1. From the Home screen, tap Gateways & Sensors in the Physical Installation
frame to select gateway to be installed.
All commissioned gateways appear under Available Gateways.
Use the scanning function for quick access to a specific gateway.
Gateways that have connection to Accelix™ will appear on the list with an active
WiFi icon.
Gateways with no connection to Accelix™ appear with a grayed out WiFi icon and
a hint to connect to Accelix™.
2. The following actions are possible from the Select Gateway to Install screen:
 Select an active gateway then tap Continue and proceed to position the
gateway at the desired location. Do not mount the gateway permanently (may
need to be repositioned).
 If an inactive gateway is selected by tapping Connect, the user is guided
through the process of connecting the gateway to Accelix™.
 Tap Skip to bypass gateway installation and proceed directly with sensor
installation. This step is possible only if at least one gateway has been
installed.
21
Physical Installation