Fluke 3563 Guide D'introduction page 20

Add sensors using one of these methods.
 Automatically — Tap the Auto Detect On/Off button to automatically find
sensors. All detected sensor will appear on the Sensors screen.
NOTE: Sensors are detected automatically only if they are in the vicinity of a
powered gateway, which must be commissioned and connected to Accelix™.
 Manually — Tap Manually to proceed to Add Manually screen.

Tap Add then enter the sensor serial number in the Serial No. field. When all
sensors have been entered, Tap Save. The sensors will appear in the Sensors
screen.
 QR Code — Tap the QR code icon then scan the QR code affixed to the side of
the sensor (1). Once scanned, the sensor is listed in the Sensors screen.
17
Commission Sensors