Stryker EOLE DC Powered Support Surface Manuel D'exploitation page 13

TRANSPORT MODE
STORAGE
1. To quickly deflate the mattress for storage, take off the CPR
strap and the CPC connectors. It will make the air release
quickly.
2. Lay the mattress out flat and upsides down.
3. Fold in half and place the control unit inside.
4. Roll from the head end towards the foot end.
5. The power cord could be wrapped around the pump bumper on
the back of pump.
6. Place the whole system into the carrying bag.
www.stryker.com
All manuals and user guides at all-guides.com
Instructions
In case of power failure or transport: Disconnect the CPC connector and
interconnect Male to Female part of the air hose connector to slow deflation.
For transport purpose, interconnect Male to Female part of the air hose
connector. When a "click" is felt or heard, the connection is completed and
secured; then air from mattress is sealed off.
836002-5210 V3.4
Return To Table of Contents
13